Troubleshooting

This section covers some of the most commonly encountered problems and attempts to resolve them.

Nodes hang on "Commissioning"

Possible Cause: Timing issues

Various parts of MAAS rely on OAuth to negotiate a connection to nodes. If the current time reported by the hardware clock on your node differs significantly from that on the MAAS server, the connection will not be made.

SOLUTION: Check that the hardware clocks are consistent, and if necessary, adjust them. This can usually be done from within the system BIOS, without needing to install an OS.

Possible Cause: Network drivers

Sometimes the hardware can boot from PXE, but fail to load correct drivers when booting the received image. This is sometimes the case when no open source drivers are available for the network hardware.

SOLUTION: The best fix for this problem is to install a Linux-friendly network adapter. It is theoretically possible to modify the boot image to include proprietary drivers, but it is not a straightforward task.

Nodes fail to PXE boot

Possible Cause: Using an incorrectly configured VM

Some virtual machine setups include emulation of network hardware that does not support PXE booting, and in most setups, you will need to explicitly set the VM to boot via PXE.

SOLUTION: Consult the VM docs for details on PXE booting.

Possible Cause: DHCP conflict

If you are using MAAS in a setup with an existing DHCP, DO NOT SET UP THE MAAS DHCP SERVER as this will cause no end of confusion to the rest of your network and most likely won't discover any nodes either.

SOLUTION: You will need to configure your existing DHCP server to point to the MAAS server.

Can't log in to node

Sometimes you may wish to log in directly to a node on your system. If you have set up Juju and MAAS, the node will automatically have SSH authentication enabled (and public keys installed) allowing you to log in. There is also an option in the MAAS web interface to add new SSH keys to the nodes (via Preferences in the drop down menu which appears when clicking your username in the top-right of the page).

Forgot MAAS administrator password

As long as you have sudo privileges the maas command can be used to change the password for a MAAS administrator on the MAAS region controller:

sudo maas changepassword $PROFILE

where $PROFILE is the name of the user.

Need to reconfigure server IP address

If you made a mistake during setup or you just need to reconfigure your MAAS server, you can simply run the setup again:

sudo dpkg-reconfigure maas-region-controller

Can't find MAAS web UI

By default, the web UI is located at http://<hostname>:5240/MAAS/. If you can't access it, there are a few things to try:

  1. Check that the webserver is running - By default the web interface uses Apache, which runs under the service name apache2. To check it, on the MAAS server box you can run sudo /etc/init.d/apache2 status.
  2. Check that the hostname is correct - It may seem obvious, but check that the hostname is being resolved properly. Try running a browser (even a text mode one like elinks) on the same box as the MAAS server and navigating to the page. If that doesn't work, try http://127.0.0.1:5240/MAAS/, which will always point at the local server.
  3. If you are still getting "404 - Page not found" errors, check that the MAAS web interface has been installed in the right place. There should be a file present called /usr/share/maas/maas/urls.py.

Backdoor image login

Ephemeral images are used by MAAS to boot nodes during commissioning, as well as during deployment. By design, these images are not built to be edited or tampered with, instead they're used to probe the hardware and launch cloud-init.

However, if you find yourself with no other way to access a node, especially if a node fails during commissioning, Linux-based ephemeral images can be modified to enable a backdoor that adds or resets a user's password. You can then login to check the cloud-init logs, for example, and troubleshoot the problem.

As images are constantly updated and refreshed, the backdoor will only ever be temporary, but it should help you login to see what may be going wrong with your node.

Extract the cloud image

First, download the cloud image that corresponds to the architecture of your node. The Images page of the web UI lists the images currently being cached by MAAS:

web UI image list

Images can be downloaded from https://cloud-images.ubuntu.com/daily/server.

For example:

wget https://cloud-images.ubuntu.com/daily/server/xenial/current/xenial-server-cloudimg-amd64-root.tar.gz

With the image downloaded, extract its contents so that the shadow password file can be edited:

mkdir xenial
sudo tar -C xenial -xpSf xenial-server-cloudimg-amd64-root.tar.gz --numeric-owner --xattrs "--xattrs-include=*"

Note: sudo is required when extracting the image filesystem and when making changes to the files extracted from the image filesystem.

Generate password hash

Now generate a hashed password. Use the following Python 3 command, replacing ubuntu with the password you wish to use:

python3 -c 'import crypt; print(crypt.crypt("ubuntu", crypt.mksalt(crypt.METHOD_SHA512)))'

Output from the previous command looks like the following:

$6$AaHblHl5KGrWBmPV$20ssynyY0EhcT9AwZgA2sTdYt4Bvd97bX7PjeyqVLKun2Hk3NBa8r7efM2duK7pi2dlnd5tG76I0dTUvjb6hx0

Open the xenial/etc/shadow file extracted from the image with a text editor and insert the password hash into the root user line of etc/shadow, between the first and second colons:

root:$6$AaHblHl5KGrWBmPV$20ssynyY0EhcT9AwZgA2sTdYt4Bvd97bX7PjeyqVLKun2Hk3NBa8r7efM2duK7pi2dlnd5tG76I0dTUvjb6hx0:17445:0:99999:7:::

Save the file and exit the text editor.

Rebuild SquashFS image

Recent versions of MAAS use SquashFS to hold the ephemeral image filesystem. The final step is to use the following command to create a SquashFS file called xenial-customized.squashfs that contains the modified shadow file:

sudo mksquashfs xenial/ xenial-customized.squashfs -xattrs -comp xz

The output should look like the following:

Parallel mksquashfs: Using 2 processors
Creating 4.0 filesystem on xenial-customized.squashfs, block size 131072.
[=======]  2516/26975   9%

You now have an ephemeral image with a working root login that can replace an image locally cached by MAAS.

Use the custom image

Images are synchronised by the region controller and stored on the rack controller in /var/lib/maas/boot-resources/, with the current directory linking to the latest synchronised images.

For example, the latest low-latency Ubuntu 16.04 image can be found in the following directory:

cd /var/lib/maas/boot-resources/current/ubuntu/amd64/ga-16.04-lowlatency/xenial/daily

To replace the original, substitute the squashfs file with the custom image generated earlier, making sure the new owner is maas:

mv squashfs squashfs_original
cp /home/ubuntu/xenial-customized.squashfs .
chown maas:maas squashfs

You can now use this image to commission or deploy a node and access the root account with the backdoor password, such as by deploying the same specific image from the web UI to the node you wish to troubleshoot.

web UI deploy image