See Historical release notes for release notes for all versions.

Release Notes - 2.3

Important announcements

Machine network configuration now deferred to cloud-init

Machine network configuration is now handled by cloud-init.

With previous versions of MAAS (and curtin), network configuration was performed directly by curtin during the installation process. In an effort to improve robustness, this network configuration has been consolidated with cloud-init.

MAAS continues to pass network configuration to curtin which in turn delegates the configuration to cloud-init.

Ephemeral images over HTTP

To reduce the number of dependencies and improve reliability, MAAS ephemeral (network boot) images are no longer loaded using iSCSI (tgt). By default, these images are now obtained using HTTP requests to the rack controller.

After upgrading to MAAS 2.3, please ensure you have the latest available images. For more information please refer to Ephemeral images now use HTTP below.

CentOS and Windows advanced network configuration

MAAS 2.3 now supports the ability to perform network configuration for CentOS and Windows via cloud-init. The MAAS CentOS images now use the latest available version of cloud-init to support these features.

New features and improvements

CentOS network configuration

MAAS now performs machine network configuration for CentOS 6 and 7, providing those operating systems with networking feature parity with Ubuntu.

The following can now be configured for MAAS deployed CentOS images:

  • Bonds, VLAN and bridge interfaces.
  • Static network configuration.

Our thanks to the cloud-init team for improving the network configuration support for CentOS.

Windows network configuration

MAAS can now configure NIC teaming (bonding) and VLAN interfaces for Windows deployments. This uses the native NetLBFO in Windows 2008+.

Contact us for more information.

Improved hardware testing

MAAS 2.3 introduces a new hardware testing framework that significantly improves the granularity and provision of hardware testing feedback. These improvements include:

  • Run individual tests. The new framework allows MAAS to run each component individually. This enables MAAS to run tests against storage devices, for example, and capture results separately.
  • Define a custom testing script with a YAML definition. The ability to describe custom hardware tests with a YAML definition enables MAAS do the following:
    • Collate details about the tests, such as script name, description, required packages, and other metadata about what information the script will gather. All of which will be used by MAAS to render in the UI.
    • Determine whether the test supports a parameter, such as storage, that lets the test to be run against individual storage devices.
    • The option to run tests in parallel.
  • Performance metrics. Capture performance metrics for the tests that can provide them:
    • CPU performance now offers a new 7zip test which includes metrics.
    • Storage performance now include a new fio test with metrics.
    • The storage test badblocks has been improved to provide the number of badblocks found as a metric.
  • Failed testing override. The ability to override a machine that has been marked ‘Failed testing’. This allows administrators to acknowledge that a machine is usable despite it having failed testing.

Hardware testing improvements include the following web UI changes:

  • Machine Listing page:
    • Displays whether a test is pending, running or failed for the machine components (CPU, Memory or Storage.)
    • Displays whether a test not related to CPU, Memory or Storage has failed.
    • Displays a warning when the machine has been overridden and has failed tests but is in a ‘Ready’ or ‘Deployed’ state.
  • Machine Details page:
    • The Summary tab now provides hardware testing information about the different components (CPU, Memory, Storage).
    • The Hardware Tests /Commission tab now displays an improved view of the latest test run, its run time as well as an improved view of previous results. It also adds more detailed information about specific tests, such as status, exit code, tags, runtime and logs/output (such as stdout and stderr).
    • The Storage tab now displays the status of specific disks, including whether a test is OK or failed after running hardware tests.

For more information, please refer to https://docs.ubuntu.com/maas/2.3/en/nodes-hw-testing

Network discovery and beaconing

In order to confirm network connectivity and aide with the discovery of VLANs, fabrics and subnets, MAAS 2.3 introduces network beaconing.

MAAS now sends out encrypted beacons to facilitate network discovery and monitoring. Beacons are sent using IPv4 and IPv6 multicast (and unicast) to UDP port 5240.

When registering a new controller, MAAS uses the information gathered from the beaconing protocol to ensure that newly registered interfaces on each controller are associated with existing known networks in MAAS.

Using network beaconing, MAAS can better correlate which networks are connected to its controllers, even if interfaces on those controllers are not configured with IP addresses.

Future uses for beaconing could include validation of networks from commissioning nodes, MTU verification and a better user experience when registering new controllers.

Upstream proxy

MAAS 2.3 enables an upstream HTTP proxy to allow MAAS-deployed machines to continue to use a caching proxy for repositories. This provides greater flexibility for closed environments, including:

  • Enabling MAAS itself to use a corporate proxy while allowing machines to continue to use the MAAS proxy.
  • Allowing machines that don’t have access to a corporate proxy to gain network access using the MAAS proxy.

Upstream proxy support includes an improved configuration pane on the settings page. See Settings > Proxy for more details.

Ephemeral images now use HTTP

Historically, MAAS used tgt to provide images over iSCSI for the ephemeral environments (such as during commissioning, the deployment environment and rescue mode). MAAS 2.3 changes the default behaviour by now providing images over HTTP instead.

This change means that initrd (run via PXE) will contact the rack controller to download the image to load in the ephemeral environment directly.

Support for using 'tgt' is being phased out in MAAS 2.3 and will no longer be supported from MAAS 2.4 onwards.

Users who would like to continue to use and load their ephemeral images via 'tgt' they can disable http boot with the following command.

maas $PROFILE maas set-config name=http_boot value=False

Usability improvements (web UI)

Alongside the UI improvements outlined above, MAAS 2.3 introduces an improved web UI design for the machines, devices and controllers detail pages that include the following changes:

  • Summary tab. Now only displays details on a specific node (machine, device or controller), organised across cards.
  • Configuration. This includes all editable settings for the specific node (machine, device or controllers).

Controller versions and notifications

The MAAS web UI now displays the version of each running controller and notifies the users of any version mismatch between the region and rack controllers.

This helps administrators identify potential problems when upgrading MAAS on a multi-node MAAS cluster, such as within a HA setup.

Other UI improvements

  • Added DHCP status column on the Subnets tab.
  • Added architecture filters
  • VLAN and Space details page no longer allows inline editing.
  • VLAN page adds the IP ranges tables.
  • Zones page converted to AngularJS (away from YUI).
  • New warnings when changing a subnet’s mode (Unmanaged or Managed).
  • Renamed Device Discovery to Network Discovery.
  • When MAAS cannot determine the hostname for discovered devices, it will show the hostname as 'unknown' and greyed-out rather than using the MAC address manufacturer as the hostname.

Rack controller deployment

MAAS 2.3 can now automatically deploy rack controllers when deploying a machine.

This is accomplished by providing cloud-init user data. Cloud-init will install and configure the rack controller after a machine has been deployed. Upon rack controller registration, MAAS will automatically detect whether the machine is a rack controller and process the transition automatically.

To deploy a rack controller, users can do so via the API (or CLI), e.g:

maas $PROFILE machine deploy $SYSTEM_ID install_rackd=True

Note: This features makes use of the MAAS snap to configure the rack controller on the deployed machine. 'snap store' mirrors are not yet available, which means the machine will need access to the internet.

Improved DNS reloading

This release includes various improvements to the DNS reload mechanism, allowing MAAS to be smarter about when to reload DNS after changes have been automatically detected or made.

API improvements

The machines API endpoint now provide more information on configured storage and provides additional output that includes volume_groups, raids, cache_sets, and bcaches fields.

Django 1.11 support

MAAS 2.3 now supports the latest Django LTS version, Django 1.11. This allows MAAS to work with the newer Django version in Ubuntu Artful, which serves as a preparation for the next Ubuntu LTS release.

  • Users running MAAS in Ubuntu Artful will use Django 1.11.
  • Users running MAAS in Ubuntu Xenial will continue to use Django 1.9.

Issues fixed with this release

For issues fixed in MAAS 2.3, please refer to the following milestone:

For more information on previous bug fixes across 2.3, please refer to the following milestones:

Get in touch

We'd love to hear about how you're using MAAS, whether it's at the smallest of scales or the largest. Our team is always approachable and can usually be found in the following locations:

  • Join us on IRC. We can be found on the maas channel on freenode.
  • Subscribe to the maas-devel mailing list, a great place to ask questions.

© 2018 Canonical Ltd. Ubuntu and Canonical are registered trademarks of Canonical Ltd.