Concepts and Terms

Here are some common terms that are essential to grasp in order to fully enjoy MAAS, not to mention the rest of this documentation.

Nodes

A node is a general term that refers to multiple, more specific objects. Nodes are managed by MAAS through a life cycle, from adding and enlistment into MAAS, through commissioning, allocation and deployment. Nodes are then either released back into the pool of nodes or retired.

Nodes include:

  • Controllers
  • Machines
  • Devices

See Machine actions and Node statuses below for an overview of a node's life cycle.

Controllers

There are two types of controllers: a region controller and a rack controller. The region controller deals with operator requests while one or more rack controllers provide the high-bandwidth services to multiple server racks, as typically found in a data centre.

A region controller consists of:

  • REST API server (TCP port 5240)
  • PostgreSQL database
  • DNS
  • caching HTTP proxy
  • web UI

A region controller can be thought of as being responsible for a data centre, or a single region. Multiple fabrics are used by MAAS to accommodate subdivisions within a single region, such as multiple floors in a data centre.

A rack controller provides:

  • DHCP
  • TFTP
  • HTTP (for images)
  • power management

A rack controller is attached to each "fabric". As the name implies, a common setup is to have a rack controller in each data centre server rack. The rack controller will cache large items for performance, such as operating system install images, but maintains no exclusive state other than the credentials required to talk to the region controller.

Both the region controller and the rack controller can be scaled-out as well as made highly available. See MAAS HA for high availability.

Machines

A machine is a node that can be deployed by MAAS.

Devices

A device is a non-deployable node. This entity can be used to track routers, for example.

Devices can be assigned IP addresses (static or dynamic) and DNS names.

They can also be assigned a parent node and will be automatically deleted (along with all the IP address reservations associated with it) when the parent node is deleted or released. This is designed to model and manage the virtual machines or containers running inside a MAAS-deployed node.

Pods

Pods, also called composable hardware, allow for the dynamic composition of machines from a pool of available hardware resources (e.g. disk space, memory, cores). See Pods for details.

Zones

A physical zone, or just zone, is an organizational unit that contains nodes where each node is in one, and only one, zone. Later, while in production, a node can be taken (allocated) from a specific zone (or not from a specific zone). Since zones, by nature, are custom-designed (with the exception of the 'default' zone), they provide more flexibility than a similar feature offered by a public cloud service (ex: availability zones).

Some prime examples of how zones can be put to use include fault-tolerance, service performance, and power management. See Zone examples for an elaboration.

A newly installed MAAS comes with a default zone, and unless a new zone is created all nodes get placed within it. You can therefore safely ignore the entire concept if you're not interested in leveraging zones.

The 'default' zone cannot be removed and its name cannot be edited.

Regions

A region is an organizational unit one level above a zone. It contains all information of all machines running in any possible zones. In particular, the PostgreSQL database runs at this level and maintains state for all these machines.

Series

A series is essentially an operating system version. For Ubuntu, a series takes into account HWE kernels. In practical terms, a series manifests itself in the form of install images that are used to provision MAAS machines. Various series are selected by the MAAS administrator.

Images

An image is used to provision a MAAS machine. MAAS images are imported based on what series have been selected. This is typically done once the install of MAAS is complete. MAAS only becomes functional once images have been imported.

Fabrics

A fabric could be described as a VLAN namespace mechanism. It's a switch or a combination of switches that use trunking to provide the same VLANs. A default fabric ('fabric-0') is created for each detected subnet when MAAS is installed.

The following conceptual diagram shows two fabrics in the same data centre or region, each using distinct VLAN ranges and their associated subnets:

fabrics and spaces

Spaces

A space is a logical grouping of VLANs whose subnets are able to communicate with one another. VLANs within each space need not belong to the same fabric. A default space is not created when MAAS is installed.

A space's main purpose is to facilitate machine acquisition for Juju. Specifically, see Juju network spaces.

Tags

A tag (not to be confused with VLAN tags) is user-created and associated with nodes based on their physical properties. These can then be used to identify nodes with particular abilities which can be useful during the deployment of services.

Subnets

A subnet is a "layer 3" network. It is defined by a network address and a network mask length (in bits) and is usually written in "CIDR" format. MAAS supports IPv4 and IPv6 subnets. Examples:

10.0.0.0/8
172.16.0.0/12
192.168.0.0/16
2001:db8:4d41:4153::/64

IP ranges

IP addresses can be reserved by adding one or more reserved ranges to a subnet configuration. There are two types of ranges that can be defined:

  • Reserved range
    Mode operates differently depending on whether the subnet is managed or unmanaged:
    • Managed (subnet): MAAS will never assign IP addresses inside this range. They can be used for anything (e.g. infrastructure systems, network hardware, external DHCP, or the namespace for an OpenStack cloud you will be building).
    • Unmanaged (subnet): MAAS will only assign IP addresses inside this range.
  • Reserved dynamic range
    An IP range that MAAS will use for enlisting, commissioning and, if MAAS-managed DHCP is enabled on the node's VLAN during commissioning, deploying. An initial range is created as part of the DHCP enablement process if done with the web UI. For an unmanaged subnet, this range is never used.

See IP ranges for how these ranges get created and Commission nodes for how they get used and Subnet management for information on managed vs. unmanaged subnets.

For details on how IP range terminology has changed since MAAS 1.9, see Upgrade from 1.9 to 2.x.

VLANs

VLANs (Virtual LANs) are a common way to create logically separate networks using the same physical infrastructure.

Managed switches can assign VLANs to each port in either a "tagged" or an "untagged" manner. A VLAN is said to be "untagged" on a particular port when it is the default VLAN for that port, and requires no special configuration in order to access it.

"Tagged" VLANs can also be used with nodes in MAAS. That is, if a switch port is configured such that "tagged" VLAN frames can be sent and received by a MAAS node, that MAAS node can be configured to automatically bring up VLAN interfaces, so that the deployed node can make use of them.

A "Default VLAN" is created for every fabric, to which every new VLAN-aware object in the fabric will be associated with by default (unless specified otherwise).

DHCP relay

A DHCP relay, or relay agent, is a network device that forwards requests and replies between a DHCP client and a DHCP server when both are not on the same physical subnet.

Two common software implementations are isc-dhcp-relay and dhcp-helper.

Interfaces

Physical

After a node is commissioned, MAAS discovers its physical interfaces.

A device is always created with at least one physical interface.

Prior to deployment, a MAAS administrator can specify additional interfaces to be configured on the node, including one or more of the below types.

Bond

A bond interface is capable of aggregating two or more physical interfaces into a single logical interface. Bonds can be used in conjunction with a managed switch (using Link Aggregation and Control Protocol, or LACP), or independently (software bonds).

VLAN

A VLAN interface can be used to connect to a tagged VLAN, if the switch port the node is connected to is authorized to access it.

Unknown

Unknown interfaces are sometimes discovered by MAAS. For example, a new DHCP lease that is not associated with any known node or device. Such an interface cannot be user-created.

Machine actions

Machine actions are essentially: "things you can do with nodes". They can be triggered via the web UI or the MAAS CLI. With the former, they are managed with the 'Take action' button in the top right corner. An action usually changes the status (see next section) of a node. Below is the full list of possible actions and their meaning, arranged alphabetically.

Abort

Abort any action that can be retried. This currently applies to Commission and Deploy.

Acquire

Allocates (reserves) a node to the MAAS user performing the action (and currently logged in). Changes a node's status from 'Ready' to 'Allocated'.

With the CLI, it is necessary to perform this action prior to deploying. With the web UI it is done automatically for the user. Acquiring in the web UI is used for machine reservation.

Commission

Commissions a node. Changes a node's status from 'New' to 'Commissioning' to 'Ready'.

Commissioning enables MAAS to build a detailed inventory of RAM, CPU, storage, NICs and accelerators like GPUs. These are itemised and usable as constraints for machine selection.

If commissioning is unsuccessful, the status becomes 'Failed commissioning'.

Any time a node's underlying networking or disk subsystem has changed it should be re-commissioned. Typically, you would mark the node as 'Broken' (see below), implement maintenance, and then Commission.

Delete

Removes a node from MAAS. The underlying machine remains unaffected. Upon rebooting it will be enlisted once more (status 'New').

Deploy

Deploys a node. Changes a node's status from 'Ready' (or 'Allocated') to a deployed status. Includes action 'Power on'.

During deployment, MAAS turns on the machine and installs a complete server operating system without manual intervention, configuring network interfaces, disk partitions and more automatically.

If deployment is unsuccessful, the status becomes 'Failed deployment'.

Note that Juju, often used in conjunction with MAAS, also uses the term "deploy" to mean "deploy an application".

Exit rescue mode

Changes a node's status from 'Rescue mode' to the 'Exiting rescue mode' transitory status and then back to its original status when the operation is complete.

Mark broken

Marks a node as broken. Changes a node's status to 'Broken'. Includes action 'Power off'.

This can be chosen if any action has failed (such as Commission and Deploy). Marking it broken guarantees that the node will not get used in any way. This would normally be followed by some level of investigation so as to determine the source of the problem.

This action can also be used to indicate that hardware maintenance is being, or will be, performed that would affect MAAS, such as modifications at the networking or disk subsystem level. In this case, the original status would be 'Deployed'.

A newly-commissioned node ('Ready') can also be marked broken.

Mark fixed

Fixes a broken node. Changes a node's status from 'Broken' to 'Ready'.

Lock

Marks a machine as locked. This prevents the user from performing actions on machines that could change their state. For example, a locked machine cannot be mistakenly powered off or released.

A machine in a locked state has a padlock symbol next to its name, both when selected and within the machine list.

machine locked state

Override failed

Allows a machine marked as ‘Failed testing’ to be usable.

Power off

Turns a node's underlying machine off.

Power on

Turns a node's underlying machine on.

Release

Releases a node back into the pool of available nodes. Changes a node's status from 'Deployed' (or 'Allocated') to 'Ready'. Includes action 'Power off'.

The user has the opportunity to erase the node's storage (disks) before confirming the action. A default erasure setting can be configured on the 'Storage' tab of the 'Settings' page. See Disk erasure for details.

Rescue mode

Boot a node ephemerally (Ubuntu running in memory on the underlying machine). This allows a user to SSH to the machine for maintenance purposes. This can be done for a Deployed or Broken node as well as for a node that failed to deploy.

Authentication and access to the node's storage works the same way it would as if the node was deployed. The fact that Ubuntu is running ephemerally is completely transparent to the user.

The node status is changed to the 'Entering rescue mode' transitory status and then to 'Rescue mode' when the operation is complete.

Set Zone

Puts the node in a specific zone.

Test hardware

Allows the user to select and run scripts to test a machine's underlying hardware. See Hardware testing for further details.

Unlock

Releases a machine from a locked state.

Node statuses

Node statuses are labels used to describe the general state of a node as known to MAAS. A node will undergo various manipulations during their time spent in MAAS and its status will change accordingly. A status change is usually caused by an action (see above section) that is applied to the node. Below is the full list of statuses and their meaning, arranged alphabetically.

Some aspects of a node can only be modified when a node has a certain status. Examples:

  • network interfaces cannot be modified without a status of either 'Ready' or 'Broken'.
  • storage cannot be modified without a status of either 'Ready' or 'Allocated'.

Allocated

The node is allocated (reserved) to a MAAS user. See node action 'Acquire'.

Broken

The node is broken. See node action 'Mark broken'.

Commissioning

The node is in the process of commissioning. See node action 'Commission'.

Deployed

The node is deployed. See node action 'Deploy'.

The visible status will be the name of the chosen OS (e.g. 'Ubuntu 16.04 LTS').

Deploying

The node is in the process of deploying. See node action 'Deploy'.

The visible status will be Deploying to 'OS', where 'OS' is the name of the OS being deployed (e.g. 'Deploying to Ubuntu 16.04 LTS').

Entering rescue mode

The node is in the process of entering rescue mode. See node action 'Rescue mode'.

Exiting rescue mode

The node is in the process of exiting rescue mode. See node action 'Exit rescue mode'.

Failed Commissioning

The node failed to commission.

Failed Deployment

The node failed to deploy.

Locked

It's not strictly a status, but a machine showing a 'padlock' symbol adjacent to its name is in a locked state.

New

The first stage of a node's life in MAAS. Typically, a node with this status has just been added to MAAS.

Ready

The node has been commissioned and is ready for use.

A node in this state has configured BMC credentials (on IPMI based BMCs) for ongoing power control, ensuring that MAAS can start or stop the machine and allocate or (re)deploy it with a fresh operating system.

Rescue mode

The node is in rescue mode and is ready to accept SSH connections. See node action 'Rescue mode'.